Page 45
Maintenance and Lubrication Schedule
1500
Cycles
Replace damaged parts. Apply Light Oil to inner
roll stop lock pivot point.
Resecure or replace if needed.
Replace damaged parts and resecure as needed.
Apply Light Oil.
Apply Light Oil. Resecure, replace or correct as
needed.
Inspect inner roll stop locks (2) and torsion springs
(2) for wear or damage and for proper operation
Inspect external snap rings:
• Outer fold arm (6)
• Lift-Tite
™
latch rollers (2)
• Lift-Tite
™
latch gas (dampening) spring (4)
• Outer barrier latch gas springs (2)
• Outer barrier latch pivots (2)
• Outer barrier switch lever pivot (1)
• Outer barrier latch rollers (2)
• Inner fold arm cam followers (4)
• Inner fold arm roller pins (4)
• Inner roll stop lever bracket pins (2)
Inspect outer fold arm pins (2), axles (2) and
bearings (8) for wear or damage and positive
securement
Remove pump module cover and inspect:
• Hydraulic hoses,
fi
ttings and connections for
wear or leaks
• Harness cables, wires, terminals and connec-
tions for securement or damage
• Relays, fuses, power switch and lights for
securement or damage
continued
