Page 36
Maintenance and Lubrication Schedule
1500
Cycles
Platform fold axles and bearings
Remove pump module cover and
inspect:
• Hydraulic hoses, fittings and
connections for wear or leaks
• Harness cables, wires, terminals
and connections for securement or
damage
• Circuit breakers, relays, and switches
for securement or damage
Apply Light Oil - See Lubrication
Diagram
Resecure, replace or correct as needed.
4500
Cycles
Resecure, replace or correct as needed
Use Braun 32840-QT hydraulic fluid
(Exxon
®
Univis HVI 26). Do not mix
with Dextron III or other hydraulic
fluids. Check fluid level with platform
lowered fully. Fill to maximum fluid
level indicated on reservoir (specified
on decal). Do not overfill. If fluid level
decal is not present - measure 35 mm
from the fill port to locate fluid level.
Tighten, repair or replace if needed.
Tighten, repair or replace if needed.
Replace if needed.
Tighten or replace if needed.
Replace damaged parts and resecure
as needed. Apply Light Grease during
reassembly procedures.
Replace if needed.
Tighten, replace or correct as needed
Inspect cotter pins on platform pivot pin
(2)
Hydraulic Fluid (Pump) - Check level.
Note: Fluid should be changed if there
is visible contamination. Inspect the
hydraulic system (cylinder, hoses,
fittings, seals, etc.) for leaks if fluid level
is low.
Inspect cylinders, fittings, and hydraulic
connections for wear, damage, or
leaks
Inspect roll stop cylinder hose assembly
(hose, fasteners, connections, etc.) for
wear, damage, or leakage
Inspect parallel arms, bearings, and
pivot pins for visible wear or damage
Inspect parallel arm pivot pin mounting
bolts (8)
Inspect platform pivot pins, bearings,
and vertical arms for wear, damage,
and positive securement
Inspect upper/lower fold arms, saddle,
saddle support, handrails, and
associated pivot pins and bearings for
visible wear or damage
Inspect gas springs (cylinders - 2 and
Lift Tite
™
dampeners -2) for wear or
damage, proper operation and positive
securement
Summary of Contents for L952SE2740IB-2
Page 44: ...Page 42...
