Page 77
Front Pump
Lift Models
Rear Pump
Lift Models
Lift Dimensions
I
I
H
H
A
A
C
J
F
B
G
Important: Minimum Clear
Door Opening Dimensions
are defined as finished door
opening, including any
intrusive door jambs,
headers, sills or hinges.
Any intrusive obstructions
within the Clear Door
Opening
must
be removed.
See the Pre-Installation
Notes for further details.
*
Automatic
Inboard
Roll Stop (
IB
)
*
Automatic
Inboard Roll Stop (
IB
)
*
Automatic
Inboard Roll Stop (
IB
)
Rear Pump
lift
model shown.
D
&
E
Does the lift clear the vehicle body by a
minimum 1" clearance
(page 12 and page
23 - point 7)?
Do the parallel arms (bottom side) clear the door sill when the lift is fully lowered (page
23 - point 3)?
Is the platform angle properly adjusted (pages 26 and 27), and is the floor level adjust-
ment correct (pages 38 and 39)?
When lowering and raising the platform:
See reverse side also
Installation Details Checklist
Is the base plate secured through the vehicle floor with eight bolts (pages 13-16)?
Are the underfloor reinforcement brackets installed as detailed on pages 13-16?
Are the ground cable, power cable and Circuit Sentry installed as detailed on pages
17-19?
Is the control box mounted to door as detailed and is the control box cable routed and
secured as detailed on pages 20 and 21?
Note:
Open and close door and function
lift through cycles to be certain the control box and cable clear the door and other
moving parts.
Have all decals been posted on the vehicle interior door panel next to the lift control
box (page 24)?
Have any necessary Quiet-Ride adjustments been made as outlined on pages 28 and
29?
Has the optional padding kit been installed (if applicable)?
Is the lift owner's (operator's) manual stored in the lift-mounted manual storage pouch
for the consumer?
Has The Braun Corporation Warranty/Registration card been filled out, processed and
mailed to The Braun Corporation?
✓
Lift Installation Checklist
Feb. 2002
25522-06/Tabloid
2/15/02, 12:21 PM
37
