Braun Flex integral 6550 ultra speed, Service Documentation, Page: 8 / 14

5704 - 8
BINC Rev: 11/97
Service Documentation
Service Information
BAG Rev: 8/97
5704
- With your thumb, position switch "G" of the sliding plate (21) as shown in dia. (extension
"H"). At the same time, with your middle finger, secure the transmission lever (25) on the
backside of the sliding plate to prevent unhinging or slipping away (see dia. "sliding
plate").
- In this position, the sliding plate (21) is, now, to be pushed through the leads "K" into the
chassis.
- Switch "G" must remain in the position described above.
- Shortly before the lower edge of the sliding plate (21) reaches lead "L", the cradle "J"
channels in the chassis pin "I".
- Release switch "G". By pressing on the long hair trimmer, the sliding plate must be
pushed downwards through the leads "L". Hereby, the single-throw switch channels in
automatically (See diagram).
Sliding plate Transmission lever function under
sliding plate