5704 - 6
BINC Rev:
11/97
Service Documentation
Service Information
BAG Rev:
8/97
5704
Dismantling
The dismantling procedure is described in a logical order. For individual repairs, the order of the
description can be altered.
•
Shaving foil
frame (2)
-
to be unlocked by pushing button "A";
- to be removed.
•
Cutter block (3)
- to be removed.
•
Swivel frame (4)
- Unscrew bearing screws (6).
- Remove swivel frame (4).
•
Plug pins (35)
- to be taken off the sides with a needle.
•
End cap (33)
- unscrew screws (34).
- remove end cap (33).
•
Display window (32)
- to be pulled downwards out of the housing case (30).
•
Housing case (30)
- unlock locking button (31).
- take off housing case (30).
•
Head carrier (8)
- unscrew screws (7).
- remove head carrier (8).
•
Lower frame (9)
- to be removed by prying open with a knife between head
carrier (8) and lower frame (9).
•
Cover (19)
- to be taken off by unhinging the 4 notches "B" on the
sides.
•
PCB (18)
- to be held underneath the batteries.
- to be taken out off the chassis (10).
•
Motor (17)
- Motor lower side to be unhinged out of plastic holder "C".
- Motor axis to be pushed out of oscillating bridge.
•
Cord socket (29)
- to be removed by snapping out notch "D" in the
chassis (10).
•
Display (27)
- to be pushed out of the chassis (10); to be removed.
•
Hood (20)
- to be taken off the leading pins on the left and right sides
of the sliding plate (21).
•
Sliding plate (21)
- to be pulled upwards out of the chassis (10), when switch
is in position "2". (Care has to be taken that the leg spring
(24) and transmission lever (25) do not slip away.)