Braun CareStyle 3 IS 3022 WH, Manual

Page: 8 / 18

(G) Descaling
To maintain optimum performance, the system
needs to be decalcified after every 15 litres of water
consumption (about 8 complete refills). The LED (5)
is flashing.
• First, switch off and unplug the appliance. Wait
until the appliance has cooled down (minimum
2.5 hours).
• Empty the water tank (E).
• Remove the iron from the iron rest (if applicable
unlock the iron).
• Remove the transparent cover (9) and unscrew
the cleaning valve (11).
• Empty the boiler.
• Pour in 500 ml tap water only. Do not use any
chemicals, additives or calc remover.
• Screw the cleaning valve (11) to close the boiler.
• Shake the base unit to rinse, then empty the
boiler.
• Repeat this procedure one more time.
• After having finished the descaling procedure,
plug in, switch on (1) and press the reset button
(4) for 5 seconds until the LED (5) turns off.
If the appliance is switched off without descaling, the
LED (5) will start to flash again when it is next switched
on. .
(H) Cleaning and maintenance
• Before cleaning, always make sure that the
appliance is switched off, unplugged and has
cooled down completely.
• Wipe the soleplate clean with a damp or dry cloth.
Never use scouring pads, vinegar or other
chemicals.
• To clean the soft material on the handle use a
damp cloth.
6
DLB254847_5712811861_Use_instruction_IS_3022_CN_UI.indb 6 15.03.17 10:01