Page 25
continued
Repeat all previously listed inspection, lubrica-
tion and maintenance procedures at 750 cycle
intervals (or per vehicle maintenance schedule).
Consecutive
750 Cycle
Intervals
1500
Cycles
MAINTENANCE and LUBRICATION
Hydraulic Fluid (Pump) - Check level. Note:
Fluid should be changed if there is visible
contamination. Inspect the hydraulic system
F\OLQGHUKRVHVÀWWLQJVVHDOVHWFIRUOHDNVLI
ÁXLGOHYHOLVORZ
Inspect vehicle-to-ramp wiring harness
Mounting
Decals and Antiskid
8VH%UDXQ47K\GUDXOLFÁXLG([[RQ
®
Univis HVI 26). Do not mix with Dextron III or
RWKHUK\GUDXOLFÁXLGV&KHFNÁXLGOHYHOZLWK
UDPSIXOO\GHSOR\HG)LOOWRPD[LPXPÁXLGOHYHO
LQGLFDWHGRQUHVHUYRLUÀOOOLQHPROGHGLQUHVHU
-
YRLU'RQRWRYHUÀOO
Resecure, repair or replace or otherwise correct
as needed
Check to see that the ramp is securely an-
chored to the vehicle and there are no loose
bolts, broken welds, or stress fractures.
Replace decals if worn, missing or illegible.
Replace antiskid if worn or missing.
Summary of Contents for BF3248Y-2
Page 21: ...Page 19 BLANK for LAYOUT...
