AESCULAP
®
3D
Einstein
Vision
® 3.0
System Set Up
Pre Surgery Preparation
•
Switch on central power supply, at back of the stack
(1)
•
Ensure individual component switches are on (bottom left corner of each unit) :
- Insufflator, Light Source, CCU, Digital Documentation
(2)
(On status is indicated by green light and user interfaces will be illuminated, or display menu options)
•
Ensure 32” 3D monitor is switched on (Right side of monitor, underneath)
(3)
•
Ensure 21” touch screen monitor is on
(Circular push/rotate switch on right side of 21” monitor. At the bottom of
the monitor)
(4)
•
Plug in integrated 3D light lead
(5)
[
if using 3D scope
]
•
Plug in 3D camera head
(6)
[
if using 3D scope
]
•
Set Insufflator to desired pressure
(7)
and flow rate
(8)
•
(1)
(2)
(3)
(4)
Start of procedure
•
Apply sterile sleeve to 3D Endoscope
•
Plug in light lead
(5
)
[
if using standard 2D scope
]
•
Plug in 2D camera
(6
)
[
if using standard 2D scope
]
•
Attach standard endoscope
[
if using standard 2D scope
]
•
Press light source control to activate
(9)
(5)
(7)
(9)
(12)
•
White balance camera head (3D or 2D*)
(11)
•
Start insufflator to commence insufflation
(12)
* Attach scope with light lead, if
using standard camera head, prior
to White balance
•
Adjust light level (rotate Rt / Lt to increase / decrease)
(10)
(10)
(11)
(8)
(6)