will flash.
• Press the enter button
more than 0.2 second and less than 2 seconds to
enter Numbers of battery (PCS) setting interface, at this moment PCS is
illuminated, numerical value under PCS flashes. Press inquiry button
or►
more than 0.2 second and less than 2 seconds to select different physical
addresses. There are 14/16/18/20 pcs of batteries for options, and the settings
will be saved in real time.
• Turn to the page of battery numbers needed, press the enter button
more
than 0.2 second and less than 2 seconds, Numbers of battery (PCS) setting is
finished, at this moment the numerical value under PCS is illuminated and stop
flashing.
• Press menu setting button
more than 2 seconds to exit the setting interface,
and get back to the main menu (or wait for at most 30 seconds, it will
automatically skip back to the main menu interface).
Note:
After back-end software setting the model (TyPE), the number of batteries
(PCS) will not change accordingly. When setting the number of battery via the
back-end software or panel, it should be ensured that the actual number of
battery, the number of battery set via charger and the number of battery set
via back-end software or LCD panel should be kept consistent with each
other. You can set the battery number of
the charger via the jumper, "000" indicates no mini jumper; "001" indicates
plugging a mini jumper on the right of the arrow; "100" indicates plugging a
jumper on the left of the arrow; "01 0" indicates plugging a jumper in the
meddle side. If the number of battery needs to be modified, please contact
with the supplier.
CN7 jumper
001
010
100
000
Number of battery
14
16
18
20
~22~
