4.1.3 LCD display
Fault icon
Buzzer Fan icon
Operation mode and
icons display area
BAT •s•s .-,
vDCAM
A
8
.-,
.-.,
PCS
MAINS ,
• '-'.
□
��c
PM �
OUT '-'
□.
ti
�:c
Value display and
_---BACKUP•s·s BHMSAM
BYPASSf
•
VAC
TIME
•
HZ PM
menU Settings area
LOAD ,
0□
:
0□
0
,=,KWAM
VER
f
•
PM
Date and fault
alarm display
LOADS
8 8%
LOG
•
LOAD
o'=-
□•=-
o'=-
KVA
TEMP
•
°C
LCD display is divided into three areas: Operation mode and icons display area, value
display and menu settings area and date and fault alarm display area.
❖
Operation mode and icons display area:
1)
There are following contents in the area of display page
► After starting up in 20 seconds, this display area mainly indicates the UPS
power rating.
► This display area mainly indicates the UPS operation mode in 20 seconds
after starting up, such as STdby (Standby mode), byPASS (Bypass mode),
Line (Utility mode), bAT (Bttery mode), bATT (Bttery self test mode),
FAULT (Fault mode), CUCF (Frequency conversion mode), ECO
(economy control operation), SHUTdn (Shutdown mode), TEST (Test
mode).
► Fan icon indicates the working status of fans. Normally, the fan shows
rotation status. The icon will flash if fans are disconnected or faulty; Buzzer
icon indicates if the buzzer is mute. Normally, this icon doesn't display.
Press the mute button in battery or fault mode or set MUTE ON via
background software in any mode, the UPS will enter mute status and the
buzzer icon will be illuminated. The fault icon is illuminated in fault mode, it
doesn't display in other cases.
~17~
