Page 12
Static and Dynamic Tests
Compatibility between the lift and the vehicle
7KHLQVWDOOHUVKDOOFRQÀUPWKHFRPSDWLELOLW\EHWZHHQWKHOLIWDQGWKHYHKLFOH
Static Test
Deformation
7KHXQODGHQSODWIRUPLVSRVLWLRQHGPLGZD\EHWZHHQJURXQGOHYHODQGYHKLFOHÁRRUOHYHODQG
PHDVXUHPHQWVDUHWDNHQRIWKHKHLJKWRIWKHSODWIRUPDQGLWVDQJXODUDWWLWXGHUHODWLYHWRWKHYHKLFOHÁRRU
A load of 425k is applied to the platform and subsequently removed.
%\UHSHDWLQJPHDVXUHPHQWVRIWKHKHLJKWDQGDWWLWXGHRIWKHSODWIRUPYHULI\WKDWQRSHUPDQHQW
deformation has occurred in any part of the lift or its attachment to the vehicle which could affect the
function of the lift.
Drift
$ORDGRINJLVDSSOLHGWRWKHSODWIRUPSRVLWLRQHGDWÁRRUOHYHO0HDVXUHPHQWVDUHWDNHQRIWKH
KHLJKWRIWKHSODWIRUPDQGLWVDQJXODUDWWLWXGHUHODWLYHWRWKHYHKLFOHÁRRU7KHVHPHDVXUHPHQWVDUH
repeated after a 15 minute test period.
9HULI\WKDWWKHYHUWLFDOGULIWRIWKHSODWIRUPEHWZHHQWKHWZRPHDVXUHPHQWVKDVQRWH[FHHGHGPP
9HULI\WKDWWKHDQJXODUGULIWRIWKHSODWIRUPEHWZHHQWKHWZRPHDVXUHPHQWVKDVQRWH[FHHGHG
If lift does drift:
1. Deploy lift to ground level.
2. Press circuit board manual override buttons L-UP and L-DN for 20 seconds.
3. Open manual down valve 1 turn and press “UP” on hand pendant for 20 seconds. Close valve.
Test to Verify that the Lift Cannot Lift Excessive Load
$ORDGRINJLVDSSOLHGWRWKHSODWIRUPSRVLWLRQHGDWJURXQGOHYHO$FWXDWHWKH´83µFRQWURODQG
verify that the platform does not lift (tilt is permissible).
1. Lower platform to the ground.
2. Place 425kg at center of platform.
3. Press up switch and verify platform does not lift (tilt is permissible).
,ISODWIRUPGRHVQRWOLIWSURFHHGWR'\QDPLF7HVW,ISODWIRUPGRHVOLIWSURFHHGWRVWHSSXPSUHOLHI
valve adjustment is necessary.
$FFHVVUHOLHIYDOYHWKURXJKFLUFXLWERDUGPRXQWLQJSODWHDFFHVVKROH/RRVHQKH[QXWRQWKH
UHOLHIYDOYHDGMXVWPHQWVFUHZGRQRWUHPRYHKH[QXW
6. Turn adjustment screw counterclockwise1/8 turn.
7. Press up switch and verify platform does not lift (tilt is permissible).
,ISODWIRUPGRHVQRWOLIWWLJKWHQKH[QXWGRQRWWXUQUHOLHIYDOYHDGMXVWPHQWVFUHZZKLOH
WLJKWHQLQJKH[QXW,ISODWIRUPGRHVOLIWUHSHDWVWHSVWKURXJK
Summary of Contents for Under-Vehicle Lift 04 Series
Page 46: ...Page 44...
