Page 9
Floor Level and Bridge Plate Adjustments
Bridge Plate Cam Adjustment
Floor Level Requirements: When the lift is po-
VLWLRQHGDWÁRRUOHYHOUDLVHGIXOO\WKHERWWRP
RIWKHSODWIRUPPXVWEHDERYHÁRRUOHYHODQG
the bridge plate must rest solidly on vehicle
ÁRRUDQGKDYHDPLQLPXPRIFPRI
YHKLFOHÁRRURYHUODS
.
Stow Level
Platform
below
Stow
Level
B
Stow Level
$GMXVWWKH)ORRU/HYHOVZLWFKÀUVW
(detailed
in previous section). If the Floor Level Re-
quirements (at right) are not met - adjust the
bridge plate cam as detailed in the following
procedures (lift in photos is not a UVL601C/
UVL603C).
1. Position the lift platform below stow level.
See Photo B. Lowering the platform will
allow access to the cam bolt securement
nut. See Photo D.
2. Remove the 1/4
"
VHUUDWHGÁDQJHQXWVH
-
curing the lifting arm cam bolt. See Pho-
tos C and D. Do not remove the bolt.
8VLQJWKHFRQWUROSHQGDQW
press the
UP button until the platform raises fully
(stops).
4. Remove the cam securement bolt (lift
bridge plate to relieve pressure on bolt).
$OORZWKHEULGJHSODWHWRUHVWRQWKHÁRRU
Continued
1/4" Serrated
Flange Nut
Cam Bolt
C
D
Summary of Contents for Under-Vehicle Lift 04 Series
Page 46: ...Page 44...
