Brasilia OPUS SUBLIMA, User Manual

Page: 15 / 28

Rev 0 - 09-2008
ENGLISH / 12
4 - USER PROGRAMMING
Is the basic programming of the machine, which allows you to
enter the following submenu:
- DOSE PROGRAMMING
- CLOCK
- SWITCH-ON
- COUNTERS
To enter PROGRAMMING press button 6 (STOP) of group
1 for about 10 seconds, until you read “PROGRAMMING”
on the display.
The display and the flashing will indicate you have entered
the programming mode.
Once you have entered, you have 30 seconds to access the
submenu, after which, if no operation has been carried out,
the machine will automatically exit the programming mode.
To browse the submenu items, press button 6, until you reach
the desired item.
4.1 DOSE PROGRAMMING:
WARNING
: Dose programming must be carried out by spe-
cialised and authorised personnel
(When enabled) it allows setting the quantity of coffee delive-
red by the groups, as well as setting the Hyperwand.
Enter PROGRAMMING and browse the menu with button
6 until you reach the item “Dose programming”; confirm the
selection by pressing button 3.
Press delivery button 1. When the coffee has reached the de-
sired level in the cup press button 1 again and the dose will
be memorised.
To programme the doses regarding buttons 2, 3, 4 proceed in
the same manner as for button 1.
2-3-4 GROUPS
Upon each programming, the doses programmed for the first
group will automatically be transfered to group 2, 3 or 4.
HYPERWAND (OPTIONAL)
Insert the Hyperwand in container full of water or milk.
Enter in Programming/Dose Programming/T Hyperwand.
Press the Hyperwand hot water delivery button and read the
temperature shown on the display.
Once the desired temperature has been reached, press the but-
ton once again to memorise it and stop delivery.
The same operation has to be carried out for the “Frothed
Milk” button.
Fig. 1
Fig. 2