pg 8
Extinguishing the Burner
• Never try to extinguish the flame using water. This is an explosion hazard.
• Allow the burner to cool for at least 30 minutes before touching with
bare hands.
• To extinguish the fire, Use the wand tool to move the cover into
the closed position. Make sure to keep cover in place for at least 5
minutes to ensure flame has been completely extinguished.
• The wand tool key is the rectangular post that is sticking up from
the cover.
• Only use the wand tool to open and close the cover. Cover will be
very hot during use and will burn the user if touched.
• If the flame does not extinguish completely when the cover is
pushed into the closed position, then move the cover back to the
open position and then to the closed position again in two more
rapid motions.
• The cover will expand during prolonged burning, so slide cover
plate with caution. If the cover gets stuck, give the edge of the
burner a firm, but gentle tap with the wand tool. Take care not to
tap too hard, causing damage to the burner.
• If there is alcohol remaining in the burner, leave the snuffer tool in
place to keep fuel from evaporating.
wand key
open position
closed position
Summary of Contents for XL Burner
Page 5: ...pg 5 Assembly Diagram...
