pg 12
Custom Cut Out Information
This information is for customers that are installing an XL burner insert into
a custom setting. The following is the size and cut out information for
the XL burner. The burner can be put into place with the flange sitting
on top of the custom built surface or the flange can be recessed into
the custom area; performance will not be effected either way.
If you are installing your burner with the flange recessed, be sure not
to cut all the way through your support material, the flange needs
something to sit on. Both cut out sizes are included in this manual.
lower box
flange
corner radius 10 mm
13
/
32
in
flange length 650 mm
25
3
/
5
in
flange width 150 mm
5
9
/
10
in
Summary of Contents for XL Burner
Page 5: ...pg 5 Assembly Diagram...
