Branson 9550C, User Manual

Page: 112 / 172

5
-
2 bRANSON 9550C
BR95O517A
(1) Draw bar
ATTACHMENT OF PTO DRIVE IMPLEMENT
2. Swing or removing the drawbar
when attaching the PTO drive im-
plement.
CAUTION
Here is a risk of being entan-
gled in the moving parts re-
sulting in injury.
Do wear the protective cloth-
ing and kits and install protec-
tive guards for the drive line.
Do not wear loose fitting clothes.
•
•
•
1. Install the implement to the tractor.
2. Raise the implement off the
ground.
3. Stop the engine, put the PTO shift
lever to "Neutral" position.
4. Connect the connecting joint by
rotating the PTO shaft manually,
to align the spline.
5. Pull the joint and check the pin is
returned to its original position to
check that the PTO shaft is se-
curely locked.
6. Move the PTO shift lever depend-
ing on work speed.
8. be sure that all guards are in nor-
mal positions and circumstances
are suitable. If the mast guard is
not properly installed, do not oper-
ated the PTO. Check that the shaft
is rotating freely with the engine
stopped and check all guards. Re-
pair or refuel, if necessary.
9. Check if there is interference.
CAUTION
Do not remove the protective
cover from the PTO drive shaft
on purpose. Otherwise, there
is a risk of severe injury. Refer
to the decal on the cover.
•