Branson 9550C, User Manual

Page: 110 / 172

5
-
2 bRANSON 9550C
BR95O513A
(1) Center Link
4. Remove the center link from the
mounting bracket.
5. Attach the center link to the top
mast of the implement.
6. Adjust the lengths of the center
link and lower link.
CAUTION
Whenever units such as imple-
ment, implement quick coupler,
and other attachment are at-
tached to 3-point hitch, check
if there is no interference, to
avoid severe personal injury or
damage of the machine.
•
(1) Remote Switch
7. Start the engine and check if there
is no interference by raising and
lowering the implement slowly us-
ing the hitch control lever.
CAUTION
If it is equipped with the elec-
tro-hydraulic system, it is pos-
sible to check if there is no in-
terference by raising and low-
ering the implement using the
remote switch which is at-
tached to the outside fender.
•
BR95O507A