Branson 9550C, User Manual

Page: 107 / 172

5
-
2 OPERATION & WORk
5
BR95O508A
(1) PTO Switch
(2) PTO Selection Switch
PTO SWITCH
The engine is not started if the PTO
ON/Off switch is in "ON" position.
Place the PTO ON/Off switch is in
"Off" position before starting the en-
gine.
To operate the PTO, turns ON by
pulling the PTO ON/Off switch up-
ward.
(1) Lowing flow Control Dial
DOWN RATE CONTROL DIAL
BR95O463A
Lowing speed of the implement is
controlled by the lowing rate control
dial.
Lowing speed varies depending on
the and the lowing flow control dial
and weight on the implement. The
heavier the implement, the faster the
rate of lowing.
If you turn the dial clockwise, the
lowing rate will be faster.
CAUTION
Excessive lowing speed can
cause injury or damage of the
tractor and implement. A suit-
able down speed of the imple-
ment is 2 sec. from the max.
height. to the min. height.
•
If you turn the dial fully in a counter-
clockwise, the implement will not be
lowered.