53
G
2. Press the »Clock«
button. The dis-
play flashes.
3. Turn the »Delayed start«
button,
until the current time is shown. The
display stops flashing.
3
When a programme is selected or run-
ning, the display shows the time the
programme cycle will be completed.
Changing the type of time display
The time of a programme is displayed on
two various ways:
– Showing the
current time of the end
of a programme cycle, e.g.
"
20.30
".
This type of display is preset at the fac-
tory. All pictured examples are relative
to this type of display.
– Showing the
programme duration
resp.
remaining time
of a programme
cycle, e.g.
"
1.30
".
If you want to change the type of display:
• Press the two marked additional keys
at the same time and wait approx.
2 seconds.
The new type of display shows, e.g.:
– "
20.30
" (End of cycle time) or
– "
1.30
" (Remaining time, pro-
gramme duration).
Delayed start
With this function you can delay the pro-
gramme start individually.
A
Do not use liquid detergent with it!
Risk of stains.
3
You set the time the programme
should be
completed
; the appliance
calculates the start time.
Important: The clock must be set to
the correct time of day (see above).
Here's how to proceed:
1. Open tap, load drum, fill in detergent.
2. Select programme, select additional
functions and spin speed if necessary.
3. Turn the »Delayed start«
button
until the desired time for the pro-
gramme end shows.
•
Don’t
press the »Start/Pause«
but-
ton. The programme starts automati-
cally. The programme sequence indica-
tor »Delayed start«
indicates that.
3
During the time-delay period more
laundry can be loaded.
Changing the preset time
The preset time setting can be changed
even after the time-delay period has started:
• Turn the »Delayed start«
button
until the desired time for the pro-
gramme end shows.
Aborting a time-delay
An active time-delay function can be
aborted at any time:
1. Set the programme selector to »Stop«,
then wait approx. 2 seconds.
2. Set the programme selector back to
the desired programme.
3. Press the »Start/Pause«
button to
start the programme.
