52
G
Child-proof lock
With the child-proof lock the appliance
can be made child-safe.
Activating the child-proof lock:
• Press both indicated buttons simulta-
neously and hold them for approx.
2 seconds, until the »child-proof lock«
indicator lamp goes on.
3
Then a running programme can not
be changed anymore, and the door
can not be opened.
3
If the programme selector is set to
»Stop«, the programme stops. To con-
tinue with the programme, set the
programme selector to the initial pro-
gramme.
Deactivating the child-proof lock:
• Press both indicated buttons simulta-
neously and hold them for approx.
2 seconds, until the »child-proof lock«
indicator lamp goes out.
Spin speed selector
3
Each programme
automatically
sets
the maximum reasonable spin speed
(see "Programme Table").
The currently set value is indicated
(range depending on model).
1600
1200
900
600
For especially sensitive textiles the spin
speed should be reduced.
• By pressing the »Spin speed«
but-
ton repeatedly you can reduce the
spin speed – or completely disable the
spin.
• If set to »No spin«
no spinning is
done; only the water is pumped off.
3
The higher the spin speed, the lower
the residual moisture.
If you wish to dry your laundry in a
dryer afterwards, select the maximum
spin speed – this helps saving energy
when drying.
Display
Depending on the operating mode the
display shows
– the current time,
– the time of the programme end.
3
If no programme is selected, the dis-
play will turn off after approx.
1 minute (to save energy).
When you actuate the programme se-
lector or the »Start/Pause«
or
»Clock«
button, the display turns
on again.
Setting the time of day
The time needs to be set:
– after the appliance has been connect-
ed to the mains,
– after a power failure,
– at change-over of summer/winter time.
3
If the clock is not set, the display
shows "
00.00
".
Here's how to set:
1. Set programme selector to »Stop«.
