Brandt WBF1114U, Instructions And Maintenance Booklet

Page: 13 / 16

- Take the DETERGENT DISPENSER right
out, pulling outwards on the handle.
- Clean the DISPENSER COMPART-
MENTS with warm water and a brush.
- Clean the SUCTION SYPHONS as well.
Once you have done this, put the dispenser
back in your washing machine.
Troubleshooting guide
If you have a problem with your washing
machine, you will probaply be able to solve
it by consulting the following guide.
If the guide does not offer a solution to the
problem, unplug your washing machine
and call your nearest AUTHORISED SERVI-
CE CENTRE. Your washing machine con-
tains no fuses or similar components which
you can change. NEVER tamper with your
washing machine.
Your washing machine does not start
Possible causes
– There is no electricity supply
– Your washing machine is not plugged
in.
– A mains fuse has blown.
– Your washing machine door is not pro-
perly shut.
– The STOP/START button has not been
pressed.
Your washing machine is not taking in
water
Possible causes
– The mains water supply has been cut
off.
– The water inlet tap is turned off.
– The hose filter is blocked.
– The pipe is blocked or bent.
Your washing machine does not empty
or spin
Possible causes
– The water outlet pipe is blocked or
bent.
Your washing machine vibrates or
makes a lot of noise.
– The INTERMAL FIXING SCREWS have
not been removed. (Consult the
Installation Manual).
– The washing machine has not been
properly levelled.
Important:
All models have a spin safety system which
stops the spin function from working if the
clothes are not properly distributed in such
a way that they could cause excessive
vibrations. If your clothes should come out
very wet, spin dry them again ensuring that
they are enely distributed in the drum.
13
ENGLISH