Brandt VS1010X, Instruction Manual

Page: 17 / 32

If your model has broken remember function, the machine will go on to finish the selected
program
. after the power cut
When the wo rking cycle has fi nished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
t he appliance usi ng the O N/O FF button, shut off the wa ter supp ly and open the door of the di shw ashe r.
Wait for a few minutes bef ore unlo ading th e dishwasher to avoi d ha ndlin g the dishes and utensils while th ey
are still hot and m ore suscept ible to break . They wi ll also dry be tter.
Switching Off the Dishwasher
The program light is on but is not blinking, only in this case the programme has ended.
1.Open the door.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Hot dishes are sensitive to minutes s hocks. The dishes should cool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishw asher to be wet insid e.
If you open the door , the ma chine will pause. The program light w ill
stop blinking and the buzzer w ill mooing every minute unless you cl ose the door . After
you close the door ,the machine will keep on working after 10 seconds.
dur ing a w ash cycle
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
1
4
5
6
Press the Start/Pause Button to stop the washing.
Press the , the dishwasher will run
after 10 seconds.
Start/Pause Button
It is dangerous to ope n the door mid-cycle,
as hot steam may scald you.
Changing the Program Mid-Cycle
Premise:
1
When you press the Start/Pause button to pause during washing, the will
stop blinking and the dishwasher w ill mooing every minute unless you press the
Star t/Paus e button to start.
running indicator
A run ning cycle can only be changed if it has only been running for a shor t time .Otherwise, the detergent may have
alrea dy been released, and t he appliance may have already drain the wash water. If thi s is the case, the detergent
dispenser must be refille d(see the section entitled Function of Detergent).
Press the Start/Pa use button , the machine will pause, press the program button more than 3s t hen you
can chan ge th e pro gram to t he desired cycle setting (see the section ent itled " Sta rting a washing program " ). 2