Brandt TV1020, Manual To Installation And Use

Page: 10 / 16

ADJUSTING THE TIMER
There is a timer for each cooking zone.
Use the button to select the cooking zone
on which you would like to use the timer.
If you press this button several times, a rotat-
ing symbol will show which cooking zone the
timer is being used for.
The rotating symbol and timer can only be
modified for a zone if it is turned on.
To use the timer:
- turn on the cooking zone
- select the rotating symbol for this cooking
zone.
The timer only operates if there is something
on the cooking zone.
- adjust the timing by pressing “
+
“ on the
timer (or “--” adjusting from 99,98,97,...min).
When you have finished cooking, the cooking
zone turns itself off, the timer shows 0 0 and a
b biip p sounds. Press any button to stop the bip.
- To change the timer settings, press the - or +
buttons on the timer.
- To stop the timer, press the button.
- To use the timer on a different cooking zone,
choose a new use by pressing the button
several times.
When the previous timing stops, set your tim-
ing for the new cooking zone using the "+" or
"-" buttons.
10
2 2 / / USING YOUR APPLIANCE EN
• •
• •
POWERING ON
Press the start/stop button for the cooking
zone you want to use. A flashing 0 and a bip
indicate that the cooking zone is on. You can
then choose the desired power level.
If you do not select a power level, the cooking
zone will automatically turn itself off.
ADJUSTING THE POWER LEVEL
- Press keys - + of the cooking zone you wish
to use to adjust the power level. Do the same
operation for the other cooking zones.
STOP
Press on the start/stop button of the zone
being used or on the “-” power button until the
display disappears.
DESCRIPTION OF
CONTROL PANEL
• •
• •
B
A
C
D
touch controls.
Start/stop
Power - +
Timer - +
Locking
A
B
C
D
• •