Brandt TE270BS1, Manual For Installation And Use

Page: 55 / 76

55
EN
P PR RO OD DU UC CT TS S//A AC CC CE ES SS SO OR RIIE ES S
T TO O B BE E U US SE ED D
. Small, hard-bristled brush.
. Safety pin
. Gentle scrubbing cream
. Cleaning sponge
. Gentle scrubbing cream
. Commercially available
specialised stainless steel
product.
Warning
Never clean your appliance while it is in operation. Set all the electric and gas
controls to zero.
Tip
— It is better to clean the parts of the hob by hand rather than in the dishwasher.
— Do not use an abrasive sponge to clean your hob.
— Do not use steam cleaning.
MAINTAINING YOUR APPLIANCE • •
W WH HA AT T T TO O D DO O
In the event that the spark plugs become
soiled, clean them using a small, hard-
bristled brush (non-metallic).
The gas injector is located in the centre of
the burner in the shape of a dish. Be
careful not to obstruct it during cleaning,
as this will undermine the performance of
your hob. In the event of obstruction, use a
safety pin to unclog the injector.
If tough stains occur, use a non-abrasive
cream, then rinse with clean water.
Carefully wipe each part of the burner
before using your hob again.
It will be easier to maintain your hob if
you clean it before it has completely
cooled down.
To clean the hob’s enamel, use a
scrubbing cream. Polish it with a dry cloth.
Do not allow acidic liquids such as lemon
juice, vinegar, etc. to remain in contact
with the enamel.
To clean the hob’s stainless steel, use a
sponge and soapy water or a
commercially available special stainless
steel product.
M MA AIIN NT TE EN NA AN NC CE E............
Of the spark plugs
and injectors
Of the pan supports
and gas burners
Of the enamel or
stainless steel
3 / DAILY CARE OF YOUR APPLIANCE
99636361_ML.qxd 08/07/2005 08:53 Page 55