Brandt SM2006B, Instruction Manual

Page: 32 / 80

32
4) LOOKING AFTER AND CLEANING YOUR MACHINE
Cleaning the oven regularly and removing any food deposits from the inside and outside of the
machine is recommended. Use a damp, soapy sponge. If the machine is not kept clean its surface
may deteriorate and inevitably affect its service life and lead to a dangerous situation. If the door or
door seal is damaged, the oven must not be used before it has been repaired by a competent
person.
Do not clean the machine with a steam cleaner.
The use of abrasive products, alcohol or thinners is not recommended. They may damage the
machine.
If there is a smell or the oven is dirty boil water with lemon or vinegar added in a cup for 2
minutes and clean the walls with a little washing-up liquid.
The plate may be taken out to facilitate cleaning. To do this take hold of it by the access areas
provided. If you remove the turntable drive avoid allowing water to penetrate into the hole for the
motor shaft. Do not forget to put back the turntable drive, the roller ring and the revolving plate.
5) TROUBLESHOOTING
If you have any doubts about the correct operation of your appliance this does not necessarily
mean it has broken down. In all cases check the following points:
You notice that... What to do?
The machine does not start.
Check your machine's connection.
Check the door of your machine is properly shut.
The machine is noisy.
The plate does not turn correctly.
Clean the rollers and the rolling area under the
revolving plate.
Check whether the rollers are properly positioned.
You notice a mist on the glass. Wipe off the condensation with a cloth.
The food has not been heated on a microwave
programme.
Check that the utensils are suitable for a microwave
oven and that the power level is suitable.
The machine produces sparks.
Clean the machine properly: remove grease,
cooking particles, etc.
Keep any metal item away from the walls of the
oven.
Never use metal items with the grill.
The bulb has blown.
Call on a qualified professional dealing with the
brand to change the bulb.
Caution:
This machine is fitted with a high voltage circuit. In all cases never do any work
inside the machine yourself.