16
Cleaning the heat exchanger filter.
1. Open the service flap.
2. Unlock the 3 catches on the filter and pull with the handle.
3. Remove the filter and clean it.
If there is too much lint on the filter, clean it in water.
Leave the filter to dry before putting it back.
4. Clean the filter seals and the handle.
5. Put the filter back.
6. Lock the 3 catches and make sure they are in the locked
position.
7. Close the flap until you hear a click.
Cleaning the heat exchanger.
•
Every two months, remove the lint accumulated on the front of the exchanger using a
vacuum cleaner with a dust brush. Do not apply excessive pressure to the exchanger as
it may damage it.
• Lint accumulated in the filter may block the circulation of air, increasing drying time
and energy consumption.
• Disconnect the appliance before cleaning!
• Do not operate the tumble dryer without a filter!
• Clean the filter after every cycle to avoid the accumulation of lint in the appliance.
Note!
Do not touch the front of the exchanger with your hands.
You may injure yourself.
Warning!
Bottom
filter
