15
Maintenance operation
Drain the tank
1.
Remove the full tank with both hands.
2.
Tilt the tank and pour the water into a sink.
3.
Put the tank back in its original place.
Warning!
•
Empty the tank after every use.
When the tank is full,
the drying programme will
pause and " " will appear. As soon as the tank is empty, restart the cycle by
pressing Start/Pause.
•
Do not drink the water in the tank.
•
Do not operate the appliance without the tank.
Cleaning the filters
This appliance is fitted with two filters: one at the bottom of the door (lint filter) and
the other in front of the heat exchanger.
Clean the lint filter after every use.
Clean the heat exchanger filter after every 5 cycles.
Cleaning the lint filter
1.
Open the door.
2.
Remove the filter.
3.
Open the filter and remove the lint.
You can rinse the filter under running water
4.
Clean the inside of the door and put everything back.
Lint filter
• Put the filter back in its original direction.
Note!
