EN-6
Note:
Press
FUNCTION
button on main unit or
remote control to select AUX 1 for your
connection.
Note:
If no audio device is connected or playback is
stopped/paused with no operation within 15
minutes, this product will automatically switch to
STANDBY mode.
Basic Operations
Power
You can use all the functions on the main unit
or the remote control after connecting to a
power supply (called Standby Mode).
Turning the System On
Press the button to turn the system on from
standby mode.
Note:
The set will switch to last selected source.
Turning the System Off
Press button on the main unit or press and
hold button on the remote control to turn the
system off and go to Eco mode.
Note:
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
Set the Clock
The built-in clock shows the correct time in the
display panel.
1. In standby mode, press and hold the
CLOCK
button on the remote control
to activate the clock setting mode,
hour indicator will blink.
2. Set the hour with the
button or
button.
3. Press
CLOCK
button to confirm, minute
indicator will blink.
4. Set the minutes with the
button or
button.
5. Press the
CLOCK
button to confirm,
the built- in clock starts operating and
the seconds start counting from 0.
Adjust Volume Level
During play, press the
+/-
buttons to increase/
decrease the volume level.
Mute Sound
During play, press the
MUTE
button to mute
or restore sound. Press this button again or
+
buttons to cancel the effect.
Play from iPod/iPhone/iPad
iPod/iPhone/iPad Operation
This unit can support the following iPod/
iPhone/iPad models:Nano 7, Touch 5, iPhone 5,
iPad 4 and iPad mini.
Note:
This unit does not support apple 30-pin
models.
Listen to the iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
1. Press the
FUNCTION
button to select
DOCK source.
2. Push down the OPEN area on the end
to rotate out the dock for
iPod/iPhone/iPad.
3. Place an iPod/iPhone/iPad into the dock.
4. Start to play the connected iPod/ iPhone/iPad.
- To pause/resume play, press the
BF
button.
- To skip to a track, press the
,
H
/
G
,
buttons.
- To search during play: press and hold
,
H
/
G
,
buttons, then release to resume
normal play.
- To navigate through the menu: hold
and press
M/CLOCK
button, then press
,
to select and press
BF
to confirm.
Downloaded from www.vandenborre.be
