EN-8
Pair with Bluetooth-enabled Device
Using One Touch (NFC)
Using an NFC compatible bluetooth device,
you can establish a bluetooth connection by
just touching the unit with it.
- Make sure bluetooth and NFC function
is enabled on your device .
1 Turn on the NFC function on your device.
- Make sure your device in the wake-up mode.
2 Turn on the unit and switch to bluetooth
source.
3 Touch the NFC sensing area with your
device, the unit will pair and connect
with your device.
4 Touch this area again, the unit will
disconnect the bluetooth connection.
Tips:
Some NFC-enabled mobile devices cannot pair
directly with the unit via NFC, please try either
one of the solutions below:
• Please download the Apps “Tap-and-
Pair” from Google Play Store(https://
play. google. com) and install.
• Pair with the unit manually first, then
touch again on the NFC sensing area.
Listen to Music from Bluetooth Device
If the connected Bluetooth device
supports Advanced Audio Distribution
Profile (A2DP), you can listen to the
music stored on the device through the
player.
If the device also supports Audio Video
Remote Control Profile (AVRCP) ,
you can use the player's remote control
to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device
(if it supports A2DP).
3. Use supplied remote control to
control play(if it supports AVRCP).
- To pause/resume play, press the
BF
/
BT
.
- To skip to a track, press the
,
H
/
G
,
.
Downloaded from www.vandenborre.be
