31
Installing your hob in all simplicity
C
hanging the type of gas supply (cont'd)
When carrying out this operation, you
should successively :
➊
Adapt the gas connection
❷
Change the injectors
❸
Adjust the retarder on the taps
➊
A
DAPT THE HOB CONNECTION
to the new
gas adjustment. Refer to the paragraph
“Gas connections”
.
❷
C
HANGE THE INJECTORS
in the following
way:
- Remove the supports, and all the bur-
ner caps and heads.
- Using the spanner supplied, unscrew
the injectors at the bottom of each dish
and remove them
(fig 1)
.
- Replace these with the injectors
supplied in the wallet, in accordance
with the gas rating table at the end
of the chapter; to do this:
➪
Screw in the injectors by hand un-
til they are tight.
➪
Put the spanner well onto the
injector.
➪
With a pencil draw a line on the
hearth plate as indicated
(fig. 2)
.
➪
Turn the spanner clockwise until
the line appears on the other side
(fig. 3)
.
Warning! Do not go
beyond this limit as you are
liable to cause damage.
- Put the burner heads, covers and
pan supports back in position.
Cover
Head
Dish
Injector
Grill
(depending
on model)
Upper side
of the hob
Spanner
Line
Fig. 3
Fig. 1
Fig. 2
99630531_ML.qxd 04/09/03 14:50 Page 31
