8
Installation
Installation
CHOICE OF LOCATION AND BUILDING IN
This appliance must be installed in a cabinet column as shown in the installation diagram.
Centre the oven in the cabinet so as to ensure a minimum gap of 10mm between the appliance and the
surrounding unit. The unit supporting the appliance must be made of heat-resistant material (or covered
with a heat-resistant material).
For greater stability, attach the oven to the unit with 2 screws through the holes provided on the side
panels.
N: xx-xx-xxxxx
xxxxxxxxx
xxxx MHz
xxxx W
xxx-xxxV ~ xxHz
Service conso.
xxxxxxxx
Made in France
Cl.B - Gr.2
UNPACKING
When you receive the appliance, unpack it or
have it unpacked immediately. Check its general
appearance. Make a note of any reservations on
the delivery slip and keep a copy.
Conseil
N’utilisez pas immédiatement votre appareil
(attendez environ 1 à 2 heures) après l’avoir transféré
d’un endroit froid vers un endroit chaud, car la
condensation peut provoquer un dysfonctionnement.
380
850
600
100
550
100
4 x 13 mm
x2
x2
x1
x1
3.5 x 9.5 mm
592
540.5
390
331
23
120
380
100
390
5
5
