2 / INSTALLATION
EN
BEFORE ELECTRICAL CONNECTION
Warning
: Ensure that your appliance has not
suffered any damage during transport (deformed seal
or door, etc...). If you see any kind of damage, before
doing anything else, contact your retailer.
If the power cable is damaged, it should be replaced by
the manufacturer, its after-sales service department or by
a qualified person to avoid danger.
Ensure that:
-
The electrical installation has sufficient voltage.
-
The electrical wires are in good condition.
-
The diameter of the wires complies with the installation
requirements.
-
Your electrical installation is equipped with 10-ampere
thermal-sensitive protection.
In case of doubt, consult your electrician installer.
Important
:
In the case of connections with an electric
receptacle, it must remain accessible after installation of the
appliance. The oven’s neutral conductor (blue wire) must be
connected to the network’s neutral conductor. In your
electrical installation, allow for a user- accessible device that
must be able to separate the appliance from the main power
supply and whose contact opening is at least 3 mm above all
the terminals.
EN-11
