5/ USING THE APPLIANCE EN
TIMER FUNCTION
The appliance contains a timer function of max 95 min. To access this function, the display
must be in « daytime » mode.
Press the
key
Set the required duration with the
Data
knob.
Press the
Start
key to start the countdown of the programmed duration.
MULTI-SEQUENCE COOKING
The appliance allows programming two consecutively executed cooking sequences, e.g. a
defrosting process followed by microwave cooking. The AutoCook function cannot be
integrated into a multi-sequence.
Example : To set a multi-sequence of 5 min defrosting followed by 7 min microwave cooking
at 80% power,
Press the
Defrost by time
key.
The display shows
dEF2.
Set the required defrosting time (example : 5 min) with the
Data
knob.
Press the
Microwave power
key.
Set the microwave power with the
Data
knob to the required level (example: 80%, P80)
Press the
Start
key to confirm the selected power.
Set the required cooking time with the
Data
knob (example: 7 minutes)
Press the
Start
key. The multi-sequence starts, the remaining time of each sequence
counts down in the display.
At the end of the first sequence, an acoustic signal informs you that the second sequence starts.
CHILD LOCK (LOCKING THE CONTROL ELEMENTS)
The appliance allows locking the control elements to avoid its unauthorized use.
To access this function, the display must be in « daytime » mode.
Press the
Stop / Clear
key for 3 sec.
An acoustic signal and the lock symbol in the display inform you that the access to the
control elements is locked.
To cancel the child lock function, proceed in the same way:
Press the
Stop / Clear
key for 3 sec.
An acoustic signal and the extinguished lock symbol in the display inform you that the
access to the control elements is available again.
EN-21
Timer/Clock
