Environment
6
SAFETY INSTRUCTIONS
Environment
— It is recommended that you
clean your oven regularly and
to remove any food build-up.
— If the appliance is not
cleaned regularly, its surface
could become damaged,
permanently affecting the
appliance’s lifespan and
possibly causing a safety
hazard.
— Do not use a steam cleaner.
— Do not use abrasive
cleaning products or hard
metal scrapers for cleaning
the oven’s glass door, as they
could scratch the surface and
cause the glass to shatter.
The electrical plug must
remain accessible after
installation.
It must be possible to
disconnect the appliance from
the power supply, either using
a plug or by fitting a switch
on the fixed wiring system in
accordance with installation
rules. The safety wire (green-
yellow) is connected to the
appliance’s ground terminal
and must be connected to the
installation’s ground lead.
If the power cable is damaged,
it should be replaced by the
manufacturer, its after-sales
service department or by a
similarly qualified person in
order to avoid danger.
Center the oven in the unit so
as to ensure a minimum dis-
tance of 10 mm between the
appliance and the surrounding
unit. The material of the unit
supporting the appliance must
be heat-resistant (or covered
with a heat-resistant material).
For greater stability, attach the
oven to the unit with 2 screws
through the holes provided on
the side panels.
This appliance must be ins-
talled more than 850 mm up
off the ground.
In order to avoid overheating,
the appliance must not be
installed behind a decorative
door.
