Brandt BKC7153LX, Manual

Page: 89 / 198

ENGLISH
5.1
“COOKING GUIDE” FUNCTION
The “COOKING GUIDE” function selects the
appropriate cooking parameters according to the
food to be prepared and its weight. Select the
“Cooking Guide” function. You must choose a
pre-programmed food from the following list:
P01 : Ready-to-cook frozen food
P02 : Ready-to-cook chilled food (combined
function)
P03 : Frozen pizza (combined function)
P04 : Frozen pizza (traditional cooking)
P05 : Fresh pizza
P06 : Quiche
P07 : Savoury tart
P08 : Poultry
P09 : Beef
P10 : Pork
P11 : Ready-to-cook chilled food (microwave)
P12 : Fish
P13 : Fresh fibrous vegetables
P14 : Fresh vegetables
P15 : Frozen vegetables
Select the function with .
Choose your food with and then confirm
with OK.
Depending on the food selected, a weight (or a
cooking time) is suggested and flashes on the
screen.
Modify the required setting with and ,
then confirm with OK .
NOTE : Duration cannot be modified for P06 and
P07.
By pressing , you access the cooking end time
setting (delayed start).
Modify it if required with and , then
confirm with OK .
AUTOMATIC DEFROST FUNCTIONS
The automatic defrost functions select the appropriate
cooking parameters according to the food to be
prepared and its weight. Select a pre-programmed
food from the list below:
DEFR1 : Defrosting meat, poultry and ready-to-cook
dishes*
DEFR2 : Defrosting fish*
DEFR3 : Defrosting bread*
* The delayed start cannot be used with these
positions.
Cooking guide
5
6.1
MEMO 1/2/3 (Memory function)
The memory function allows you to save 3 common
cooking (or defrosting) programs, which you can
then use thanks to quick selection.
Programming a memory key
First programme a cooking mode of your choice
with (e.g. fan).
Adjust the temperature and the power (e.g.: 220°C)
and then the cooking time (e.g.: 25 minutes).
Save your cooking program by
holding down
the
OK button until:
MEMO -1- flashes in the display. Select one of the
available memory programs: 1 – 2 or 3 with
and to go from one to the next. Confirm with
the OK button, a beep will confirm that it has been
saved.
Using a memory program
Select the function with .
MEMO will appear in the display.
Choose the required memory 1 – 2 or 3 with
and to go from one to the next.
Press the OK button and the programmed memory
will be displayed. Press the
OK
button again, the
oven will turn on and the program will start.
Please note :
Follow the same steps to replace the previous
programming.
You can save all functions except automatic
programs.
Use of the Memory function
6
Select the automatic defrost function .
Select a program and enter the weight of the food
with and (in steps of 50 g) and then confirm
with OK . The oven starts.
By pressing , you access the cooking end time setting
(see chapter on delayed start).
Half-way through the cooking time, the oven
informs you to turn over your food with a beep
and by displaying the word “TURN”.