EN-3
Mode Status
Bluetooth pairing Blue indicator light will flash quickly.
Paired
Blue indicator light will stop flashing. A beep will be heard.
NOTE:
Once the Bluetooth device is connected for the first time, the speaker
will remember the paired setting and will automatically reconnect to
the same Bluetooth device the next time they are in range.
OPERATING THE UNIT
Use the unit as a speaker when connected wirelessly via Bluetooth.
Adjust the volume as desired by repeatedly pressing
VOL+/-
.
Select the desired track to play by pressing
/
.
To pause, press
. To resume play, press
again.
NOTE:
•
When you want to play audio/video from another Bluetooth device, disconnect the speaker
from the Bluetooth device already in use.
•
To terminate the Bluetooth connection, press
BT
. The Bluetooth indictor light will go out.
Press
BT
again to start pairing.
AUX MODE
1. Connect the speaker to any device with a headphone/earphone jack or line out using a
3.5 mm audio cable.
2. Press AUX IN to enter the AUX mode.
•
The red AUX IN indicator light will illuminate.
3. Operate the device as usual. The sound will be heard from the speaker.
CLEANING AND MAINTENANCE
Switch off and disconnect the unit from the mains socket before cleaning and maintenance.
Clean the unit with a soft, slightly damp cloth and wipe it with a dry cloth.
Never immerse it in water.
Do not use abrasive or chemical cleaning agents.
SPECIFICATIONS
Power input:
18V
2000mA
Output power:
40W
We apologise for any inconvenience caused by minor inconsistencies in these instructions,
which may occur as a result of product improvement and development.
Kesa Electricals © UK: EC1N 6TE 11 / 09 / 2013
Downloaded from www.vandenborre.be
