Brandt AX 330, Operating Instructions Manual

Page: 23 / 30

43
GB
42
GB
Options / Settings / information
Cancelling a programme
Hold down the “ Start / Cancel ” button for two
seconds.
The display shows “
”, and you can then
re-programme.
This programme tells you the savings made for 30
minutes after the programme is complete.
Display of the energy savings made for the
Affichage des gains réalisés sur l’énergie pour le pro-
gramme .
Advantages : this programme optimises your
machine’s operation according to your use, to
obtain the best washing and drying results, while
making energy savings.
Options / Settings / information
Delaying the start of the programme
After selecting your programme, press the
“ Delayed Start ” button 1 to 24 times to
select the chosen delay of 1 to 24 hours.
The chosen time delay flashes on the dis-
play.
Confirm by pressing “ Start ”. The delayed
start time is displayed. The display counts
down the time hour by hour.
When the time delay has expired, the pro-
gramme actually starts and the display
counts down the minutes for the pro-
gramme.
The time remaining for
the programme that is
running
(the programme will
finish in 1 hour 30
minutes).
Starting the programme immediately
Switch the machine on and select your
programme. Press the “
Start ”
button.
The “Remaining Time” light illuminates
and the display shows you the approximate
time to the end of the programme, in min-
utes.
While the programme is running, access to
the keypad is automatically protected from
any operation. It unlocks automatically at
the end of the programme or if you cancel
the programme.
Programme end
At the end of the programme, the display shows “
”, (except in the
case of
) until the door is opened. Once the door has been
opened, the display shows the length of the recommended programme
: the preferred programme
When you switch on, Interaxio proposes the programme you have
used most often during the last 5 operations. In the case of 5 different
programmes, is proposed.
Advantages : the system adapts to your use
and reduces the number of manipulations you have to make.
Extra drying option:
You can activate this option by holding
down the
“ ” button and pressing
“Start”; the display shows “ ”.
You can deactivate this function (to save
on energy). Repeat the same operation
and the display goes out.