Brandt AX 330, Operating Instructions Manual

Page: 21 / 30

Présentation de votre lave-vaisselle
39
GB
Présentation de votre lave-vaisselle
38
GB
Selecting a washing programme Loading the dishwasher
① ①
② ②
Adjusting to the HIGH POSITION :
Gently lift the basket until you hear
the first “Click ” on both sides.
Adjusting to the LOW POSITION:
Lift the basket at the back on both sides
( “Click” ) and then gently lower it.
Depending on the model: when loading large plates into the lower
basket, you may have to adjust the height of the upper basket. This
can be done even when the basket is full.
Check that the slides are both at the same height and that the basket is
level.
The upper basket
This basket is designed in particular to
take: glasses, cups, ramekins, small
salad bowls, bowls, saucers, etc.
You can also place cups, ladles, etc. on
the foldaway brackets as well as a
cutlery basket.
Arrange stemmed glasses along the wire
shelf.
Refer to the Programmes table on
the following pages to determine the
best programme for the amount of
washing up and how dirty it is.
Press the “ON / OFF” button to switch on the machine.
Press the button for the programme you desire; the illuminated light
shows the selected programme.
Press “Start” . The display shows the approximate time to com-
plete the programme, in minutes.
Check that your
power cable is con-
nected and your water tap is
open.
Place glasses,
cups and bowls
facing downwards.
The wire tray enables you to load cutlery of all sizes. You can lay it in
the lower basket or in the upper one by removing the cup supports.
To make loading easier, move the tray to position
➊
and then return it
to position
➋
.