28
English
Caution!
Ensure that the appliance is not placed near any flammable materials or
fluids, or with the air discharge pointing in these directions.
6. Commissioning
Connect the appliance to a suitable socket. To start the appliance, put the ON/
OFF switch on the rear of the appliance to the "I" position and make sure that it is
placed on a flat surface.
Switching on and off
Press the "Power" button (
) on the remote control or the control elements of
the fan heater to turn the appliance on or off. Once the appliance is switched on,
the following symbol appears in the display:
If the appliance is switched off, the heating elements are switched off first. The
fan will continue to run for about 1 minute to cool itself down.
Mode selection
Select a heating mode using the "Mode" button. You can choose between Heat
setting 1 "
" Heat setting 2 "
" and the fan mode. As long as heat setting 2
is enabled, the symbols of heat setting 1 and heat setting 2 are shown in the fan
display. If the fan heater is in fan mode, neither of the two heat setting symbols is
shown in the display. Select the heat setting depending on how fast you want the
fan heater to reach the corresponding temperature.
Setting the temperature
You can set the temperature using the "Up" button (
) and "Down" button (
). You can select temperatures between 15°C and 35°C. Once you select the
desired temperature, the heater remains switched on until the room temperature
reaches the temperature on the digital display. The heater switches on and off
to maintain the desired room temperature. The time taken to reach the desired
temperature depends on the heating mode. Select heating mode 1 for the slightly
slower, but power-saving mode, or heating mode 2 for slightly faster mode.