Tools & Supplies Needed:
Phillips screw driver
Adjustable wrench
Wire strippers
Straight Pick Tool
Electrical Tape
Soldering Iron (optional)
Step 1. Check that all parts are included in this kit.
Step 2. Locate all camera kits that will be attached to display stand.
(sold separately)
Step 3. Installation of Backup Camera
3.1- Locate the two mounting
holes and the single harness
storage hole.
INSTALLATION INSTRUCTIONS
7” Monitor
AVMS-3700/AVMS-3701
Backup Camera
Front Camera
Side Cameras
Power Supply
a.
c.
b.
a.
inside
outside
Bracket
a.
inside outside
Page 2/5
Brandmotion Tech Support: (734)-619-1250
Monitor Foot
Spacer
3.2- Feed bolts from inside
display and tighten offset
nuts from outside display.
3.3- Feed camera harness
through top hole. Locate
two holes in bracket and
slide bracket onto bolts.
3.4- Attach second nut to
bolt on exterior of bracket,
then tighten to secure
bracket in place.
