Conrad Meier Fish Harvester User Guide
Page 33
Page 32
Conrad Meier Fish Harvester User Guide
Looking a
fter y
our kit
Looking after your kit
Clean after every use
To ensure that any sand, salt and other foreign matter is removed, clean all
your equipment with fresh water
after every use
, including:
•
the Conrad Meier Fish Harvester (including the motor, propellor, and
rudder)
• the beach trolley
• the winch
•
the battery terminals and connectors
•
the trace rack, and
•
anything that has come into contact with fish.
Pay particular attention to attachments and threading, especially around the
hatch .
•
Use a damp cloth to clean the remote control casing.
Do not
use soap or
solvents, as this may affect the waterproof coating.
•
When finished for the day, take the batteries out of the hull and leave the
hatch open to the air to ensure all is dry .
Check and replace
Check the main line and traces periodically for weaknesses, damage or wear.
Replace any sections that are seriously damaged.
We recommend that you replace the entire main line every 2 years.
After multiple uses, the clips on the traces can become loose. These can be
tightened gently with pliers.
Waterproofing
Applying waterproof marine grease will ensure that electrical components are
safe and secure from water damage. These parts include:
•
battery terminals and connectors,
and
•
threading in the hatch
and the
strobe light case.
We recommend that you re-grease the servo unit
at least once a year .
Notes
Summary of Contents for Conrad Meier Fish Harvester
Page 1: ...Owner s Manual ...
