background image

Conrad Meier Fish Harvester User Guide

 

Page 11

Page 10

 

Conrad Meier Fish Harvester User Guide

Part and description

Battery box

The battery box protects the two 

12V batteries and secures them in 

place .

Emergency winch handle

The emergency winch handle is 

initially located under the beach 

trolley’s foldaway transport shelf . 

It is used in the event that the 

batteries run out or there is a 

problem with the motor . 

To use the emergency winch 

handle:
• 

disengage the motor by 

pulling out the motor engage/

disengage knob, then

• 

slot the emergency winch 

handle onto the shaft inside the 

motor engage/disengage knob.

Beach trolley

The beach trolley is a convenient way to carry all your Conrad Meier 

Fish Harvester equipment when you need to walk to the fishing area, 

particularly when walking in deep sand.

Note:

 You will need to assemble the trolley when it first arrives (see page 12).

Easy transport

The beach trolley has mounting brackets and locking pins designed to house 

the electric winch. The winch weighs 25kg (55lbs) with the battery attached. 

We recommend you leave the winch mounted on the trolley for fishing. There 

is no need to un-mount it .

The beach trolley also has a foldaway transport shelf (capable of supporting up 

to 100kg (220lbs) for carrying your extra equipment.

(continued)

Conrad Meier Fish Harvester 

Support Posts

Trolley Handle

Axle and Split 

Pin

Winch Mounting Brackets 

and Locking Pins

Foldaway 

Transport Shelf

Removable 

Wheel

Frame

Lower Winch  

Mounting Hooks

Summary of Contents for Conrad Meier Fish Harvester






















Reviews: