PCMCIA 1 Port RS422/485
Software Installation
Chapter 3 Page 19
Settings available in this window are:
Baud Rate.
Data Bits.
Parity.
Stop Bits.
Flow Control.
Restore Defaults - When clicked, this will reset the selected port to
the default values of:
Baud Rate:
9600
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
Xon / Xoff
Maximum Baud Rate Setting
These settings allow access to the faster data rates available on this
card. The faster rates are not enabled by default for compatibility
purposes. The faster data rates are only available directly from your
application if it uses the standard Windows dialogue for serial port
settings.
Baud Rate Multiplier
This enables applications that do not use the standard Windows
serial port configuration dialogue to access the faster data rates.
e.g. with this option enabled, an application which selects 115,200
baud will actually set the hardware to the fastest possible rate of
921,600 baud. In other words the baud rate is multiplied by a factor
of 8.
Change to suit remote device.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
