PCMCIA 1 Port RS422/485
Software Installation
Chapter 3 Page 21
Windows 2000 Installation
•
Insert the card into an available type2 socket. This can be done
even if the machine is powered ON.
•
If installing from a "power off" condition Windows 2000 should
then load normally. During the booting process, Windows 2000
will detect the card and briefly display a message box indicating
the detection process.
•
Windows will then display the "Found New Hardware Wizard",
requesting “insert any disk which came with the card”. Insert the
Serial Solutions CDROM installation disk or the Serial
Solutions floppy disk into an appropriate drive and click 'Next' .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
