Braillo 650 SF, User Manual

Page: 11 / 155

BRAILLO
l
B 650 SF
11
2. INSTALLATION
Space:
The minimum space required for the Braillo 650 SF is approximately 6 x 3 m (19.5 x 10 feet) as at
least 1.5 m free space is required behind the paper roll feeder (so the paper roll can be replaced) as well
as 1 m free space on both sides so that it can be properly operated, cleaned and maintained.
Environment:
Braillo Printers are made to operate continuously and to be reliable for many years. However, sensi-
tive electronic and mechanical parts require a suitable installation environment to ensure long and
trouble-free operation. Temperature should be between 15° - 30° C (60° - 86° F), and relative humidity
between 40 and 60%.
Maintain a clean environment because dust may clog the Printer - especially with high humidity. Too
low humidity should also be avoided to prevent electrostatic problems.
Some paper qualities may generate excessive paper dust. This should be removed with a vacuum
cleaner and a damp cloth. (About every 50,000 Sheets).
Electrical: Single phase 230 volt (+/- 10%), 50/60 Hz, circuit breakers should be min. 10 amps, prefer-
able 16 amps.
Be sure to consult your distributor/supplier for further details concerning the installation site.
Failure to meet the installation requirements may relieve the supplier of any warranty responsibilities.
4200 mm
1030 mm
Top view
1900 mm
Side view