Brahler MSI8V CDSVAN, Operating Instructions Manual

Page: 14 / 28

MSI8V CDS VAN
14
Starting Up
The power supply is turned on via the power switch on the front side of the Compact Transmitter MSI8V.
When you use the Compact Transmitter the first time it is necessary to adjust the provided channels.
This procedure will allocate the transmitter frequencies to the respective channels.
For adjusting this allocation refer to the following figure. The scheme is enclosed with the Compact
Transmitter as a separate sticker which may be adhering to the front panel.
OFF
ON
Ch30-Ch37
OFF
ON
Ch14-Ch29
OFF
ON
ChOR-Ch13
30
31
32
33
34 35
36
37
18 19
20
21
22
23
24
25
26
27
28
29
14
15
16
1
7
O
R
1
2 3 4 5
6
7
8
9
IF1
011
12
13
The following allocation is shown on the figure above:
First figure: Channel 1; second figure: Channel 16; third figure: Channel 32
The left DIP-switch will activate the corresponding channel. DIP switch to ON means channel is active.
Tuning input/output levels
There are no controls necessary for a successful event.
All levels are set and stored within the CDSVAN software environment.