Introduction and Spec's
Introduction and Spec's
2
INTRODUCTION
z
These installation instructions cover the installation of Braemar WF2000 series gas wall
furnaces. They apply to 30 and 40 MJ/hr, natural gas and propane, and inbuilt and console
models.
z
For console installations, one of the following "Console & Flue Cover Kits" is required:
- Up to 3m ceiling height
P/No 087818
- 3 to 3.6m ceiling height
P/No 087825
z
An optional "Rear Register Kit" (P/No 085142) is available to direct up to 60% of the heated
air flow to the rear.
WALL FURNACE SPECIFICATIONS
Main
2.55
30
0.90
1.50
30
2.70
Pilot
0.32
0.50
-
0.20
0.50
-
40 MJ/hr
Main
2.95
40
0.90
1.75
40
2.70
Pilot
0.32
0.50
-
0.20
0.50
-
30 MJ/hr
WF2000-30N
Injector
diameter
(mm)
Gas rate
(MJ/hr)
Test point
pressure
(kPa)
Injector
diameter
(mm)
Gas rate
(MJ/hr)
Test point
pressure
(kPa)
WF2000-30P
WF2000-40N
WF2000-40P
Natural gas
Propane
IMPORTANT
z
The 30 MJ/hr wall furnace is intended for domestic applications and replacement of older
wall furnaces. Due to its higher thermal efficiency and improved air distribution, it is suitable
for replacement of older 40 MJ/hr models.
z
The 40 MJ/hr wall furnace is suitable for heating very large areas and is not generally
recommended for normal domestic applications due to the higher air flow rates.
1800
496
1630
45
167
232
247
385
385
I N B U I L T
C O N S O L E
