background image

1

Product Data

PG96VAT

TWO--STAGE, 4--WAY MULTIPOISE

VARIABLE--SPEED

CONDENSING GAS FURNACE

A11300

The two--stage gas valve is at the heart of the comfort provided by

this furnace, along with the variable--speed ECM blower motor,
and two--speed inducer motor. With an Annual Fuel Utilization

Efficiency (AFUE) up to 96.0%, the two--stage gas furnace
provides exceptional savings as well when compared to standard

gas furnaces. This furnace also features 4--way multipoise

installation flexibility, and is available in six model sizes. The
PG96VAT can be vented for direct vent/two--pipe, ventilated

combustion air, or single--pipe applications. All units meet
California Air Quality Management District emission requirements.

All sizes are design certified in Canada.

STANDARD FEATURES

S

All sizes meet ENERGY STAR

R

Version 4.0 criteria for gas

furnaces: 95+AFUE; AMACF electrical rating; 2% or less
cabinet airflow leakage.

S

Ideal height 35” (889 mm) cabinet: short enough for taller coils,
but still allows enough room for service.

S

Silicon Nitride Hot Surface Igniter.

S

4--way multipoise design for upflow, downflow or horizontal
installations, with unique vent elbow and optional through--
the--cabinet downflow venting capability.

S

Full--featured variable--speed blower motor, two--speed inducer
motor, and two--stage gas valve.

S

Self--diagnostics.

S

Adjustable blower speed for cooling, continuous fan, and
dehumidification.

S

Aluminized--steel primary heat exchanger.

S

Stainless--steel condensing secondary heat exchanger.

S

Propane convertible (See Accessory list).

S

Factory--configured ready for upflow applications.

S

Fully--insulated casing including blower section.

S

Convenient Air Purifier and Humidifier connections.

S

Direct--vent/sealed combustion, single--pipe venting or
ventilated combustion air.

S

Installation flexibility: sidewall or vertical vent.

S

Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1--in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.

C E RT I F I E D

Always Ask For

Use of the AHRI Certified 

TM

 Mark indicates a

manufacturer’s participation in the program.  For
verification of certification for individual products,
go to www.ahridirectory.org.

Summary of Contents for PG96VAT

















Reviews: