Flue Adaptor Kit Installation
Flue Adaptor Kit Installation
7
FLUE ADAPTOR KIT (P/No 079981)
z
The flue adaptor is used to connect between the flue spigot on the top of the Braemar
WF2000 and the bottom of the existing flue system to allow the WF2000 to be installed at
the correct height for some replacement installations, and to enable the use of the existing
flue system (note that if the existing flue system is to be used it must comply with the current
requirements of AS5601 "Gas installations").
z
Fit the flue adaptor into the bottom of the existing flue before fitting the Braemar top
mounting bracket. The location of the top and bottom mounting brackets must comply with
details given on page 4 or 5 of this manual.
Braemar top
mounting bracket
system and existing heater
Bottom of existing flue
top mounting bracket
top mounting bracket
Fit over spigot on Braemar
Flue adaptor (P/No 079981)
