Braeburn 140404 Installation Manual Download Page 15

 LED 

COLOR 

INDICATION

  Thermostat LED’s (4 Positions)
 

Red 

24 VAC available to Thermostat

  Y1 

Yellow 

Thermostat First Stage Compressor Call

  Y2 

Yellow 

Thermostat Second Stage Compressor Call

  W1/E/AX1 

White 

Thermostat Call for W1 or E or AX1 

  W2/AX2 

White 

Thermostat Call for W2 or AX2

  O/B/W3 

Yellow 

Thermostat Call for O, B or W3

  G 

Green 

Thermostat Fan Call

  Damper LED’s (4 Positions)  

  Power Close / Power Open 

Red / Green 

Red On Damper Closed; Green on Damper Open

   

 

No light when wiring short detected

  Fire Alarm LED

 

 

  Fire Indication 

Red 

Fire Terminals Active - Panel is Shut Down

15

In addition to LED’s, the expandable zone panel has a full function built-in backlit display panel that provides 
information on the current operations of the zone panel. When the expandable zone panel is running in normal 
operation, the display is updated continuously to show the system operating parameters. The system will show 
the following status screens on the display.

Number of Heat Calls

 currently being serviced. Check the panel 

LED if it is necessary to determine exactly which zones are calling 
for heat operation. If Auxiliary Heat or Emergency Heat calls are 
active, the display will replace heat calls with Auxiliary or 
Emergency Heat Calls.

Number of Cool Calls

 currently being serviced. Check the panel 

LED if it is necessary to determine exactly which zones are calling 
for cooling operation.

Summary of Contents for 140404























Reviews: